Acrylic Painting – Abstract Art Demonstration | Radial

Acrylic Painting – Abstract Art Demonstration | Radial

Thanks for watching this video. If you loved it remember to like this video to encourage me Think also to click subscribe and click on the bell to receive my new videos. If you want to go further and become…

Fixing a Paper Jam on the HP Color LaserJet Pro MFP M277dw | HP LaserJet | HP

Fixing a Paper Jam on the HP Color LaserJet Pro MFP M277dw | HP LaserJet | HP

If your printer control panel displays a Paper Jam error, paper might be jammed inside the printer’s paper path. Clear any paper jams and the error message to resume printing. Paper stuck in the printer’s paper path can cause jams.…

Loading Paper HP LaserJet Printers | HP

Loading Paper HP LaserJet Printers | HP

This video shows how to load paper into HP LaserJet M701, M706, and LaserJet Pro MFP M435 printers. To load Letter, A4, or smaller sized paper, follow these steps. Make sure that the tray is not in use. Pull the…

Loading Paper in the HP OfficeJet 5200 and ENVY 5000, 6200, 7100, 7800 Printer Series | HP

Loading Paper in the HP OfficeJet 5200 and ENVY 5000, 6200, 7100, 7800 Printer Series | HP

Loading Paper in the HP OfficeJet 5200 and ENVY 5000, 6200, 7100, and 7800 Printer Series Slide out the paper input tray, and then if necessary, remove the output tray. Slide in the photo paper tray, if your printer has…

Fixing a Paper Jam on HP OfficeJet Pro 6900 Printers | HP OfficeJet | HP

Fixing a Paper Jam on HP OfficeJet Pro 6900 Printers | HP OfficeJet | HP

If your HP OfficeJet Pro 6900 printer stops feeding pages and a Paper Jam error displays printer on the control panel, your printer has a paper jam. Fix the jam and clear the error message to resume printing. Remove jammed…

FreeCAD Tutorial – General #11 – How to map a sketch to a face

FreeCAD Tutorial – General #11 – How to map a sketch to a face

HOW TO MAP A SKETCH TO A FACE I’m going to map this sketch (‘Sketch 2’) on some faces. You see it’s laying on the default x-axis. First i select the face on which the sketch must be mapped on.…

FreeCAD Tutorial – General #15 – How to use sketch elements

FreeCAD Tutorial – General #15 – How to use sketch elements

HOW TO USE SKETCH ELEMENTS When you are in a sketch, look at the ‘Elements’ menu. Here you can also select the sketches you made. You can choose between different types of elements. Now you can select starting points only.…

FreeCAD Tutorial – General #18 – How to create a sketch

FreeCAD Tutorial – General #18 – How to create a sketch

HOW TO CREATE A SKETCH Select the ‘Complete’, ‘Part Design’ or ‘Sketcher’ workbench. Click on ‘Create a new sketch’. The first sketch will be created on the XY-Plane without offset. Click on the ‘View’ tab in the properties window. Set…